Queen Anne's County, Maryland GIS Map
This GIS map of Queen Anne's County, Maryland (MD) shows the official Census county boundary (FIPS 24035), with federal layers you can switch on for FEMA flood zones, USGS elevation contours and hillshade, NLCD land cover, and school district lines.
Queen Anne's County has a population of about 51,825 (U.S. Census Bureau, 2020-2024 ACS 5-year estimate) and a land area of 371.7 square miles. Use the inspect tool to read coordinates, elevation and the layers under any point.
- State
- Maryland (MD)
- Population
- 51,825
- Land area
- 371.7 sq mi
- Density
- 139 / sq mi
- Coordinates
- 39.0407, -76.0824
- FIPS code
- 24035
Queen Anne's County Demographics
Source: U.S. Census Bureau, American Community Survey 2020-2024 5-year estimates.
Population
51,825
Households
19,907
Median household income
$112,826
Median age
44.7 years
Median home value
$462,700
Median gross rent
$1,619/mo
Owner-occupied homes
82.9%
Bachelor's degree or higher
38%
Below poverty level
6.4%
Land area
371.7 sq mi
Population density
139 / sq mi
Queen Anne's County Population Growth
Source: U.S. Census Bureau, 2010 Census and Population Estimates Program (Vintage 2024: April 2020 estimates base and July 1, 2024 estimate).
2010 Census
47,798
April 2020 (estimates base)
49,880
July 2024 estimate
53,688
Change 2010-2020
+4.4%
Change 2020-2024
+7.6%
Natural Hazard Risk in Queen Anne's County
FEMA National Risk Index ratings for Queen Anne's County, compared with all U.S. counties.
Overall risk
Score 35.6 of 100
Expected annual loss
Buildings, population & agriculture
Social vulnerability
Susceptibility to hazard impacts
Community resilience
Ability to prepare & recover
Risk by Hazard
- DroughtRelatively High
- HurricaneRelatively Low
- Coastal FloodingRelatively Moderate
- Winter WeatherRelatively Moderate
- WildfireVery Low
- Heat WaveRelatively Low
- EarthquakeVery Low
- Strong WindRelatively Low
- LightningRelatively Low
- Ice StormRelatively Low
- Inland FloodingVery Low
- TornadoRelatively Low
- HailVery Low
- Cold WaveRelatively Low
- LandslideVery Low
Source: FEMA National Risk Index (December 2025 release). County-level ratings are relative to other U.S. counties and are not a property-specific assessment.
Environmental Conditions in Queen Anne's County, Maryland
Radon potential, monitored air quality and current drought status for Queen Anne's County, Maryland, from the Environmental Protection Agency and the U.S. Drought Monitor.
Radon potential
Zone 3
low radon potential
EPA predicts an average indoor level below 2 pCi/L, so the EPA still recommends testing, because elevated radon can occur anywhere.
Drought status
Abnormally dry in 95.8% of the county
Drought Severity and Coverage Index 95.8 of 500.
- D0 Abnormally dry95.8%
Map of 13 October 2026.
Sources: EPA Map of Radon Zones (September 2025), EPA Air Quality Index (2024) and the U.S. Drought Monitor. A radon zone is a regional planning tool, not a prediction for any individual home — the EPA recommends testing every home regardless of zone. Air quality is shown only for counties that host an EPA monitor. Drought figures describe one weekly map, not a long-term climate average. Compare counties in Maryland.
GIS Data for Queen Anne's County, MD
The Queen Anne's County GIS map on this page loads live federal layers in your browser, so you can check flood zones, terrain, land cover and district boundaries anywhere in Queen Anne's County without a separate GIS login. All of the Queen Anne's GIS data below is drawn from public U.S. government sources.
Layers you can turn on
FEMA flood zones
National Flood Hazard Layer — flood insurance rate map zones and floodways.
Elevation contours and hillshade
USGS 3DEP terrain, so you can read slope and relief across the county.
Land cover
NLCD land cover classes — forest, developed, wetland and water.
School districts
Census TIGER unified and elementary school district boundaries.
ZIP code and county boundaries
Census TIGER ZCTA and county boundary lines.
Map tools
Measure distance and area
Draw a line or polygon to get length in miles or area in acres.
Sketch and annotate
Add points, lines and shapes on top of the map.
Inspect any point
Click the map to read coordinates, elevation and the layers under your cursor.
Download the map
Save the current view as a PNG image.
Where the data comes from
County boundaries come from the U.S. Census Bureau TIGER/Line program, flood zones from FEMA's National Flood Hazard Layer, terrain from the USGS 3D Elevation Program, land cover from the Multi-Resolution Land Characteristics Consortium, and demographics from the American Community Survey.
Property records and tax maps in Queen Anne's County
Most people who look up Queen Anne's County GIS data are after parcel-level records: who owns a property, what it last sold for, and what it is assessed at. Those records are kept locally, not federally, so they are not part of this map. Queen Anne's County property and tax map data lives with the county's own records office, and what that office is called varies by state — Texas counties run an appraisal district (usually searched as a “CAD”), Kentucky uses a Property Valuation Administrator (PVA), and most other states use a county assessor, auditor or tax office. Start with that office for a deed, a tax map number or a parcel boundary; use the map above for flood zones, elevation and land cover on the same land.
Queen Anne's County FAQ
What state is Queen Anne's County in?
+
Queen Anne's County is a county in Maryland (MD).
What is the population of Queen Anne's County?
+
Queen Anne's County, Maryland has a population of about 51,825, according to the U.S. Census Bureau American Community Survey.
How big is Queen Anne's County?
+
Queen Anne's County covers about 371.7 square miles of land, with a population density of roughly 139 people per square mile.
What is the FIPS code for Queen Anne's County?
+
The FIPS county code for Queen Anne's County, Maryland is 24035. It is used to identify the county in federal datasets such as Census TIGER and FEMA flood maps.
What is the median household income in Queen Anne's County?
+
The median household income in Queen Anne's County, Maryland is about $112,826 per year.
What is the radon zone for Queen Anne's County?
+
Queen Anne's County is in EPA radon Zone 3, meaning the EPA predicts an average indoor radon level below 2 pCi/L. In this zone the EPA still recommends testing, because elevated radon can occur anywhere. The EPA is clear that a radon zone is a regional planning tool and not a prediction for any individual home.
Is Queen Anne's County in a drought?
+
As of the 13 October 2026 U.S. Drought Monitor map, abnormally dry covers 95.8% of Queen Anne's County, and the county's Drought Severity and Coverage Index is 95.8 out of 500.
What is Queen Anne's GIS?
+
Queen Anne's GIS usually refers to the county's own parcel and zoning mapping system, which Queen Anne's County publishes itself. This page is a separate, free viewer: it draws federal GIS layers — FEMA flood zones, USGS elevation, NLCD land cover and Census boundaries — over the Queen Anne's County boundary, with no login required.
What GIS data is available for Queen Anne's County?
+
The Queen Anne's County map loads federal GIS layers directly in your browser: FEMA National Flood Hazard Layer flood zones, USGS 3DEP elevation contours and hillshade, NLCD land cover, Census TIGER school district boundaries, and TIGER ZIP code and county boundary lines.
How do I check flood zones in Queen Anne's County?
+
Open the Queen Anne's County map, turn on the FEMA flood zones layer, and zoom in. The National Flood Hazard Layer shows flood insurance rate map zones and floodways. Flood zones only draw once you are zoomed in far enough.
How do I find the coordinates or elevation of a spot in Queen Anne's County?
+
Use the inspect tool on the Queen Anne's County map and click any point. It reads back the coordinates, elevation and the layers under your cursor. You can also measure distance and area by drawing a line or polygon.
Data sources for Queen Anne's County, Maryland
Every figure on this page comes from a published government dataset. Each source is listed with its release date so you can check the number or cite it directly.
- American Community Survey 5-year estimates
U.S. Census Bureau · 2020-2024 · population, income, housing, education and poverty figures
- Gazetteer Files
U.S. Census Bureau · 2024 · place coordinates, land area and the county/place/ZIP crosswalk
- TIGER/Line Shapefiles
U.S. Census Bureau · 2024 · county, ZIP Code Tabulation Area and school district boundaries
- National Flood Hazard Layer
Federal Emergency Management Agency · current effective Flood Insurance Rate Maps · flood zones, floodways and base flood elevations
- National Risk Index
Federal Emergency Management Agency · v1.20, December 2025 · county natural hazard risk, expected annual loss, social vulnerability and resilience
- 3D Elevation Program (3DEP)
U.S. Geological Survey · current · elevation contours, shaded relief and point elevations
- National Land Cover Database
Multi-Resolution Land Characteristics Consortium · NLCD 2021 · land cover classes such as developed, forest, crop and water
- Map of Radon Zones
U.S. Environmental Protection Agency · September 2025 · the county radon zone (1, 2 or 3) and its predicted indoor radon potential
- Air Quality Index annual summary by county
U.S. Environmental Protection Agency · 2024 · median, 90th percentile and peak AQI, and days at unhealthy levels, for counties with an EPA monitor
- U.S. Drought Monitor
National Drought Mitigation Center, USDA and NOAA · weekly, current map · the share of county area in each drought category and the Drought Severity and Coverage Index
- ArcGIS basemaps
Esri · current · streets, satellite, topographic and dark gray basemap tiles
Citing this page
GIS Map, “Queen Anne's County, Maryland GIS Map”, https://gismap.land/county/maryland/queen-anne-s. Figures from the datasets listed above.
Local notes for Queen Anne's County, MD
Questions and local knowledge from people who know the area. Every note is read before it appears here.