Hill County, Montana GIS Map
This GIS map of Hill County, Montana (MT) shows the official Census county boundary (FIPS 30041), with federal layers you can switch on for FEMA flood zones, USGS elevation contours and hillshade, NLCD land cover, and school district lines.
Hill County has a population of about 16,155 and a land area of 2,899.4 square miles, and the map covers the city listed inside it plus 1 ZIP code. Use the inspect tool to read coordinates, elevation and the layers under any point.
- State
- Montana (MT)
- Population
- 16,155
- Land area
- 2,899.4 sq mi
- Density
- 6 / sq mi
- Coordinates
- 48.6320, -110.1063
- FIPS code
- 30041
- City
- 1
- ZIP code
- 1
Hill County is not the only one — there is 1 other state with a county of the same name. Compare every Hill County.
Hill County Demographics
Source: U.S. Census Bureau, American Community Survey 2020-2024 5-year estimates.
Population
16,155
Households
6,206
Median household income
$52,798
Median age
34.5 years
Median home value
$202,600
Median gross rent
$776/mo
Owner-occupied homes
66.1%
Bachelor's degree or higher
24.4%
Below poverty level
20.7%
Land area
2,899.4 sq mi
Population density
6 / sq mi
Cities in Hill County
ZIP codes in Hill County
Hill County Population Growth
Source: U.S. Census Bureau, 2010 Census and Population Estimates Program (Vintage 2024: April 2020 estimates base and July 1, 2024 estimate).
2010 Census
16,096
April 2020 (estimates base)
16,293
July 2024 estimate
16,065
Change 2010-2020
+1.2%
Change 2020-2024
-1.4%
Natural Hazard Risk in Hill County
FEMA National Risk Index ratings for Hill County, compared with all U.S. counties.
Overall risk
Score 50.4 of 100
Expected annual loss
Buildings, population & agriculture
Social vulnerability
Susceptibility to hazard impacts
Community resilience
Ability to prepare & recover
Risk by Hazard
- Cold WaveRelatively High
- Winter WeatherRelatively High
- WildfireVery Low
- LightningRelatively Moderate
- DroughtRelatively Low
- Inland FloodingRelatively Low
- LandslideVery Low
- Heat WaveVery Low
- HailVery Low
- EarthquakeVery Low
- Ice StormVery Low
- Strong WindVery Low
- TornadoVery Low
- AvalancheVery Low
Source: FEMA National Risk Index (December 2025 release). County-level ratings are relative to other U.S. counties and are not a property-specific assessment.
Environmental Conditions in Hill County, Montana
Radon potential, monitored air quality and current drought status for Hill County, Montana, from the Environmental Protection Agency and the U.S. Drought Monitor.
Radon potential
Zone 1
highest radon potential
EPA predicts an average indoor level at or above 4 pCi/L, so the EPA recommends a radon test for every home in this zone, and a mitigation system for new construction.
Air quality (2024)
Median AQI 15Good
2 days at unhealthy for sensitive groups or worse.
90th percentile 46, peak 123 across 339 monitored days.
Drought status
Abnormally dry in 11% of the county
Drought Severity and Coverage Index 11 of 500.
- D0 Abnormally dry11%
Map of 13 October 2026.
Sources: EPA Map of Radon Zones (September 2025), EPA Air Quality Index (2024) and the U.S. Drought Monitor. A radon zone is a regional planning tool, not a prediction for any individual home — the EPA recommends testing every home regardless of zone. Air quality is shown only for counties that host an EPA monitor. Drought figures describe one weekly map, not a long-term climate average. Compare counties in Montana.
Wildfire History in Hill County, Montana
Every wildfire reported to a federal, state or local agency in Hill County, Montana between 1992 and 2024, from the U.S. Forest Service Fire Program Analysis Fire Occurrence Database.
Recorded fires
164
about 5.0 a year across 33 years
Acres burned
33,836
1,025 acres a year on average
Largest single fire
18,915
acres in one fire
Fires of 1,000+ acres
5
30,474 acres, 90% of all burned area
12 acres burned per square mile of county land since 1992 — the figure that makes Hill County comparable with counties of a very different size.
Moderate burn history162 of those fires (99% of the county's total) were discovered in 2015 or later — 10 of the 33 years covered, so the recent decade is over-represented in the record.
Source: USFS Fire Program Analysis Fire Occurrence Database (7th edition, 1992-2024). The database holds fires that were reported to a federal, state or local agency with a discovery date, a final size and a location at least as precise as a one-square-mile grid. It is not a census of every ignition: a small fire that no agency recorded does not appear, so a low count is not proof that a county does not burn. Burn history is not a forecast — for the official wildfire risk score, see the hazard section above. Compare wildfire history across counties.
GIS Data for Hill County, MT
The Hill County GIS map on this page loads live federal layers in your browser, so you can check flood zones, terrain, land cover and district boundaries anywhere in Hill County without a separate GIS login. All of the Hill GIS data below is drawn from public U.S. government sources.
Layers you can turn on
FEMA flood zones
National Flood Hazard Layer — flood insurance rate map zones and floodways.
Elevation contours and hillshade
USGS 3DEP terrain, so you can read slope and relief across the county.
Land cover
NLCD land cover classes — forest, developed, wetland and water.
School districts
Census TIGER unified and elementary school district boundaries.
ZIP code and county boundaries
Census TIGER ZCTA and county boundary lines.
Map tools
Measure distance and area
Draw a line or polygon to get length in miles or area in acres.
Sketch and annotate
Add points, lines and shapes on top of the map.
Inspect any point
Click the map to read coordinates, elevation and the layers under your cursor.
Download the map
Save the current view as a PNG image.
Where the data comes from
County boundaries come from the U.S. Census Bureau TIGER/Line program, flood zones from FEMA's National Flood Hazard Layer, terrain from the USGS 3D Elevation Program, land cover from the Multi-Resolution Land Characteristics Consortium, and demographics from the American Community Survey.
Property records and tax maps in Hill County
Most people who look up Hill County GIS data are after parcel-level records: who owns a property, what it last sold for, and what it is assessed at. Those records are kept locally, not federally, so they are not part of this map. Hill County property and tax map data lives with the county's own records office, and what that office is called varies by state — Texas counties run an appraisal district (usually searched as a “CAD”), Kentucky uses a Property Valuation Administrator (PVA), and most other states use a county assessor, auditor or tax office. Start with that office for a deed, a tax map number or a parcel boundary; use the map above for flood zones, elevation and land cover on the same land.
Hill County FAQ
What state is Hill County in?
+
Hill County is a county in Montana (MT).
What is the population of Hill County?
+
Hill County, Montana has a population of about 16,155, according to the U.S. Census Bureau American Community Survey.
How big is Hill County?
+
Hill County covers about 2,899.4 square miles of land, with a population density of roughly 6 people per square mile.
What is the FIPS code for Hill County?
+
The FIPS county code for Hill County, Montana is 30041. It is used to identify the county in federal datasets such as Census TIGER and FEMA flood maps.
What cities are in Hill County?
+
Havre is the city listed on GIS Map inside Hill County.
What ZIP codes are in Hill County?
+
Hill County contains 1 ZIP code mapped on GIS Map. The full list is linked from this page.
What is the median household income in Hill County?
+
The median household income in Hill County, Montana is about $52,798 per year.
What is the radon zone for Hill County?
+
Hill County is in EPA radon Zone 1, meaning the EPA predicts an average indoor radon level at or above 4 pCi/L. In this zone the EPA recommends a radon test for every home in this zone, and a mitigation system for new construction. The EPA is clear that a radon zone is a regional planning tool and not a prediction for any individual home.
What is the air quality in Hill County?
+
Across 2024, the EPA monitor covering Hill County recorded a median Air Quality Index of 15 (Good) and a 90th percentile of 46, with a peak of 123. 2 days reached unhealthy for sensitive groups or worse. Only counties that host an EPA monitor have these figures.
Is Hill County in a drought?
+
As of the 13 October 2026 U.S. Drought Monitor map, abnormally dry covers 11% of Hill County, and the county's Drought Severity and Coverage Index is 11 out of 500.
Does Hill County have a wildfire history?
+
Between 1992 and 2024, 164 wildfires were reported to a federal, state or local agency in Hill County, burning 33,836 acres in total — about 1,025 acres a year. The largest single fire covered 18,915 acres, and 5 fires reached 1,000 acres or more. The figures come from the U.S. Forest Service Fire Program Analysis Fire Occurrence Database, which records fires that were reported with a discovery date, a final size and a location at least as precise as a one-square-mile grid — so a small fire no agency recorded does not appear.
What is Hill GIS?
+
Hill GIS usually refers to the county's own parcel and zoning mapping system, which Hill County publishes itself. This page is a separate, free viewer: it draws federal GIS layers — FEMA flood zones, USGS elevation, NLCD land cover and Census boundaries — over the Hill County boundary, with no login required.
What GIS data is available for Hill County?
+
The Hill County map loads federal GIS layers directly in your browser: FEMA National Flood Hazard Layer flood zones, USGS 3DEP elevation contours and hillshade, NLCD land cover, Census TIGER school district boundaries, and TIGER ZIP code and county boundary lines.
How do I check flood zones in Hill County?
+
Open the Hill County map, turn on the FEMA flood zones layer, and zoom in. The National Flood Hazard Layer shows flood insurance rate map zones and floodways. Flood zones only draw once you are zoomed in far enough.
How do I find the coordinates or elevation of a spot in Hill County?
+
Use the inspect tool on the Hill County map and click any point. It reads back the coordinates, elevation and the layers under your cursor. You can also measure distance and area by drawing a line or polygon.
Local notes for Hill County, MT
Questions and local knowledge from people who know the area. Every note is read before it appears here.