Dare County, North Carolina GIS Map
This GIS map of Dare County, North Carolina (NC) shows the official Census county boundary (FIPS 37055), with federal layers you can switch on for FEMA flood zones, USGS elevation contours and hillshade, NLCD land cover, and school district lines.
Dare County has a population of about 37,875 and a land area of 383.2 square miles, and the map covers all 5 cities listed inside it plus 4 ZIP codes. Use the inspect tool to read coordinates, elevation and the layers under any point.
- State
- North Carolina (NC)
- Population
- 37,875
- Land area
- 383.2 sq mi
- Density
- 99 / sq mi
- Coordinates
- 35.6063, -75.7675
- FIPS code
- 37055
- Cities
- 5
- ZIP codes
- 4
Dare County Demographics
Source: U.S. Census Bureau, American Community Survey 2020-2024 5-year estimates.
Population
37,875
Households
16,836
Median household income
$88,994
Median age
49 years
Median home value
$460,400
Median gross rent
$1,345/mo
Owner-occupied homes
78.4%
Bachelor's degree or higher
43.2%
Below poverty level
6.6%
Land area
383.2 sq mi
Population density
99 / sq mi
Cities in Dare County
Dare County Population Growth
Source: U.S. Census Bureau, 2010 Census and Population Estimates Program (Vintage 2024: April 2020 estimates base and July 1, 2024 estimate).
2010 Census
33,920
April 2020 (estimates base)
36,912
July 2024 estimate
38,183
Change 2010-2020
+8.8%
Change 2020-2024
+3.4%
Natural Hazard Risk in Dare County
FEMA National Risk Index ratings for Dare County, compared with all U.S. counties.
Overall risk
Score 89.6 of 100
Expected annual loss
Buildings, population & agriculture
Social vulnerability
Susceptibility to hazard impacts
Community resilience
Ability to prepare & recover
Risk by Hazard
- HurricaneRelatively High
- LightningRelatively High
- Winter WeatherRelatively High
- Coastal FloodingRelatively High
- WildfireRelatively Low
- Heat WaveRelatively Low
- Inland FloodingRelatively Low
- TornadoRelatively Low
- Strong WindRelatively Low
- EarthquakeVery Low
- Ice StormVery Low
- Cold WaveVery Low
- LandslideVery Low
- DroughtVery Low
- HailVery Low
Source: FEMA National Risk Index (December 2025 release). County-level ratings are relative to other U.S. counties and are not a property-specific assessment.
Environmental Conditions in Dare County, North Carolina
Radon potential, monitored air quality and current drought status for Dare County, North Carolina, from the Environmental Protection Agency and the U.S. Drought Monitor.
Radon potential
Zone 3
low radon potential
EPA predicts an average indoor level below 2 pCi/L, so the EPA still recommends testing, because elevated radon can occur anywhere.
Drought status
Moderate drought in 1.9% of the county
Drought Severity and Coverage Index 101.9 of 500.
- D0 Abnormally dry98.1%
- D1 Moderate drought1.9%
Map of 13 October 2026.
Sources: EPA Map of Radon Zones (September 2025), EPA Air Quality Index (2024) and the U.S. Drought Monitor. A radon zone is a regional planning tool, not a prediction for any individual home — the EPA recommends testing every home regardless of zone. Air quality is shown only for counties that host an EPA monitor. Drought figures describe one weekly map, not a long-term climate average. Compare counties in North Carolina.
Wildfire History in Dare County, North Carolina
Every wildfire reported to a federal, state or local agency in Dare County, North Carolina between 1992 and 2024, from the U.S. Forest Service Fire Program Analysis Fire Occurrence Database.
Recorded fires
702
about 21.3 a year across 33 years
Acres burned
4,585
139 acres a year on average
Largest single fire
900
acres in one fire
Fires of 1,000+ acres
0
none recorded
12 acres burned per square mile of county land since 1992 — the figure that makes Dare County comparable with counties of a very different size.
Moderate burn history218 of those fires (31% of the county's total) were discovered in 2015 or later — 10 of the 33 years covered, so the recent decade is over-represented in the record.
Source: USFS Fire Program Analysis Fire Occurrence Database (7th edition, 1992-2024). The database holds fires that were reported to a federal, state or local agency with a discovery date, a final size and a location at least as precise as a one-square-mile grid. It is not a census of every ignition: a small fire that no agency recorded does not appear, so a low count is not proof that a county does not burn. Burn history is not a forecast — for the official wildfire risk score, see the hazard section above. Compare wildfire history across counties.
GIS Data for Dare County, NC
The Dare County GIS map on this page loads live federal layers in your browser, so you can check flood zones, terrain, land cover and district boundaries anywhere in Dare County without a separate GIS login. All of the Dare GIS data below is drawn from public U.S. government sources.
Layers you can turn on
FEMA flood zones
National Flood Hazard Layer — flood insurance rate map zones and floodways.
Elevation contours and hillshade
USGS 3DEP terrain, so you can read slope and relief across the county.
Land cover
NLCD land cover classes — forest, developed, wetland and water.
School districts
Census TIGER unified and elementary school district boundaries.
ZIP code and county boundaries
Census TIGER ZCTA and county boundary lines.
Map tools
Measure distance and area
Draw a line or polygon to get length in miles or area in acres.
Sketch and annotate
Add points, lines and shapes on top of the map.
Inspect any point
Click the map to read coordinates, elevation and the layers under your cursor.
Download the map
Save the current view as a PNG image.
Where the data comes from
County boundaries come from the U.S. Census Bureau TIGER/Line program, flood zones from FEMA's National Flood Hazard Layer, terrain from the USGS 3D Elevation Program, land cover from the Multi-Resolution Land Characteristics Consortium, and demographics from the American Community Survey.
Property records and tax maps in Dare County
Most people who look up Dare County GIS data are after parcel-level records: who owns a property, what it last sold for, and what it is assessed at. Those records are kept locally, not federally, so they are not part of this map. Dare County property and tax map data lives with the county's own records office, and what that office is called varies by state — Texas counties run an appraisal district (usually searched as a “CAD”), Kentucky uses a Property Valuation Administrator (PVA), and most other states use a county assessor, auditor or tax office. Start with that office for a deed, a tax map number or a parcel boundary; use the map above for flood zones, elevation and land cover on the same land.
Dare County FAQ
What state is Dare County in?
+
Dare County is a county in North Carolina (NC).
What is the population of Dare County?
+
Dare County, North Carolina has a population of about 37,875, according to the U.S. Census Bureau American Community Survey.
How big is Dare County?
+
Dare County covers about 383.2 square miles of land, with a population density of roughly 99 people per square mile.
What is the FIPS code for Dare County?
+
The FIPS county code for Dare County, North Carolina is 37055. It is used to identify the county in federal datasets such as Census TIGER and FEMA flood maps.
What cities are in Dare County?
+
Cities in Dare County listed on GIS Map include Kill Devil Hills, Kitty Hawk, Manteo, Nags Head, Outer Banks.
What ZIP codes are in Dare County?
+
Dare County contains 4 ZIP codes mapped on GIS Map. The full list is linked from this page.
What is the median household income in Dare County?
+
The median household income in Dare County, North Carolina is about $88,994 per year.
What is the radon zone for Dare County?
+
Dare County is in EPA radon Zone 3, meaning the EPA predicts an average indoor radon level below 2 pCi/L. In this zone the EPA still recommends testing, because elevated radon can occur anywhere. The EPA is clear that a radon zone is a regional planning tool and not a prediction for any individual home.
Is Dare County in a drought?
+
As of the 13 October 2026 U.S. Drought Monitor map, moderate drought covers 1.9% of Dare County, and the county's Drought Severity and Coverage Index is 101.9 out of 500.
Does Dare County have a wildfire history?
+
Between 1992 and 2024, 702 wildfires were reported to a federal, state or local agency in Dare County, burning 4,585 acres in total — about 139 acres a year. The largest single fire covered 900 acres, and no fire reached 1,000 acres. The figures come from the U.S. Forest Service Fire Program Analysis Fire Occurrence Database, which records fires that were reported with a discovery date, a final size and a location at least as precise as a one-square-mile grid — so a small fire no agency recorded does not appear.
What is Dare GIS?
+
Dare GIS usually refers to the county's own parcel and zoning mapping system, which Dare County publishes itself. This page is a separate, free viewer: it draws federal GIS layers — FEMA flood zones, USGS elevation, NLCD land cover and Census boundaries — over the Dare County boundary, with no login required.
What GIS data is available for Dare County?
+
The Dare County map loads federal GIS layers directly in your browser: FEMA National Flood Hazard Layer flood zones, USGS 3DEP elevation contours and hillshade, NLCD land cover, Census TIGER school district boundaries, and TIGER ZIP code and county boundary lines.
How do I check flood zones in Dare County?
+
Open the Dare County map, turn on the FEMA flood zones layer, and zoom in. The National Flood Hazard Layer shows flood insurance rate map zones and floodways. Flood zones only draw once you are zoomed in far enough.
How do I find the coordinates or elevation of a spot in Dare County?
+
Use the inspect tool on the Dare County map and click any point. It reads back the coordinates, elevation and the layers under your cursor. You can also measure distance and area by drawing a line or polygon.
Local notes for Dare County, NC
Questions and local knowledge from people who know the area. Every note is read before it appears here.