Victoria County, Texas GIS Map
This GIS map of Victoria County, Texas (TX) shows the official Census county boundary (FIPS 48469), with federal layers you can switch on for FEMA flood zones, USGS elevation contours and hillshade, NLCD land cover, and school district lines.
Victoria County has a population of about 91,413 and a land area of 882.1 square miles, and the map covers the city listed inside it plus 3 ZIP codes. Use the inspect tool to read coordinates, elevation and the layers under any point.
- State
- Texas (TX)
- Population
- 91,413
- Land area
- 882.1 sq mi
- Density
- 104 / sq mi
- Coordinates
- 28.7964, -96.9712
- FIPS code
- 48469
- City
- 1
- ZIP codes
- 3
Victoria County Demographics
Source: U.S. Census Bureau, American Community Survey 2020-2024 5-year estimates.
Population
91,413
Households
34,855
Median household income
$70,896
Median age
36.7 years
Median home value
$209,900
Median gross rent
$1,157/mo
Owner-occupied homes
65.3%
Bachelor's degree or higher
19.9%
Below poverty level
16.2%
Land area
882.1 sq mi
Population density
104 / sq mi
Cities in Victoria County
Victoria County Population Growth
Source: U.S. Census Bureau, 2010 Census and Population Estimates Program (Vintage 2024: April 2020 estimates base and July 1, 2024 estimate).
2010 Census
86,793
April 2020 (estimates base)
91,322
July 2024 estimate
91,949
Change 2010-2020
+5.2%
Change 2020-2024
+0.7%
Natural Hazard Risk in Victoria County
FEMA National Risk Index ratings for Victoria County, compared with all U.S. counties.
Overall risk
Score 86.5 of 100
Expected annual loss
Buildings, population & agriculture
Social vulnerability
Susceptibility to hazard impacts
Community resilience
Ability to prepare & recover
Risk by Hazard
- HurricaneRelatively High
- Cold WaveRelatively High
- DroughtRelatively Moderate
- TornadoRelatively Moderate
- Heat WaveRelatively Moderate
- WildfireRelatively Low
- LightningRelatively Moderate
- Inland FloodingRelatively Low
- Ice StormRelatively Moderate
- HailRelatively Low
- Winter WeatherRelatively Low
- Strong WindRelatively Low
- Coastal FloodingVery Low
- EarthquakeVery Low
- LandslideVery Low
Source: FEMA National Risk Index (December 2025 release). County-level ratings are relative to other U.S. counties and are not a property-specific assessment.
Environmental Conditions in Victoria County, Texas
Radon potential, monitored air quality and current drought status for Victoria County, Texas, from the Environmental Protection Agency and the U.S. Drought Monitor.
Radon potential
Zone 3
low radon potential
EPA predicts an average indoor level below 2 pCi/L, so the EPA still recommends testing, because elevated radon can occur anywhere.
Air quality (2024)
Median AQI 35Good
2 days at unhealthy for sensitive groups or worse.
90th percentile 49, peak 105 across 355 monitored days.
Drought status
Severe drought in 48.6% of the county
Drought Severity and Coverage Index 248.6 of 500.
- D1 Moderate drought51.4%
- D2 Severe drought48.6%
Map of 13 October 2026.
Sources: EPA Map of Radon Zones (September 2025), EPA Air Quality Index (2024) and the U.S. Drought Monitor. A radon zone is a regional planning tool, not a prediction for any individual home — the EPA recommends testing every home regardless of zone. Air quality is shown only for counties that host an EPA monitor. Drought figures describe one weekly map, not a long-term climate average. Compare counties in Texas.
Wildfire History in Victoria County, Texas
Every wildfire reported to a federal, state or local agency in Victoria County, Texas between 1992 and 2024, from the U.S. Forest Service Fire Program Analysis Fire Occurrence Database.
Recorded fires
1,464
about 44.4 a year across 33 years
Acres burned
17,848
541 acres a year on average
Largest single fire
1,143
acres in one fire
Fires of 1,000+ acres
2
2,143 acres, 12% of all burned area
20 acres burned per square mile of county land since 1992 — the figure that makes Victoria County comparable with counties of a very different size.
Moderate burn history931 of those fires (64% of the county's total) were discovered in 2015 or later — 10 of the 33 years covered, so the recent decade is over-represented in the record.
Source: USFS Fire Program Analysis Fire Occurrence Database (7th edition, 1992-2024). The database holds fires that were reported to a federal, state or local agency with a discovery date, a final size and a location at least as precise as a one-square-mile grid. It is not a census of every ignition: a small fire that no agency recorded does not appear, so a low count is not proof that a county does not burn. Burn history is not a forecast — for the official wildfire risk score, see the hazard section above. Compare wildfire history across counties.
GIS Data for Victoria County, TX
The Victoria County GIS map on this page loads live federal layers in your browser, so you can check flood zones, terrain, land cover and district boundaries anywhere in Victoria County without a separate GIS login. All of the Victoria GIS data below is drawn from public U.S. government sources.
Layers you can turn on
FEMA flood zones
National Flood Hazard Layer — flood insurance rate map zones and floodways.
Elevation contours and hillshade
USGS 3DEP terrain, so you can read slope and relief across the county.
Land cover
NLCD land cover classes — forest, developed, wetland and water.
School districts
Census TIGER unified and elementary school district boundaries.
ZIP code and county boundaries
Census TIGER ZCTA and county boundary lines.
Map tools
Measure distance and area
Draw a line or polygon to get length in miles or area in acres.
Sketch and annotate
Add points, lines and shapes on top of the map.
Inspect any point
Click the map to read coordinates, elevation and the layers under your cursor.
Download the map
Save the current view as a PNG image.
Where the data comes from
County boundaries come from the U.S. Census Bureau TIGER/Line program, flood zones from FEMA's National Flood Hazard Layer, terrain from the USGS 3D Elevation Program, land cover from the Multi-Resolution Land Characteristics Consortium, and demographics from the American Community Survey.
Property records and tax maps in Victoria County
Most people who look up Victoria County GIS data are after parcel-level records: who owns a property, what it last sold for, and what it is assessed at. Those records are kept locally, not federally, so they are not part of this map. Victoria County property and tax map data lives with the county's own records office, and what that office is called varies by state — Texas counties run an appraisal district (usually searched as a “CAD”), Kentucky uses a Property Valuation Administrator (PVA), and most other states use a county assessor, auditor or tax office. Start with that office for a deed, a tax map number or a parcel boundary; use the map above for flood zones, elevation and land cover on the same land.
Victoria County FAQ
What state is Victoria County in?
+
Victoria County is a county in Texas (TX).
What is the population of Victoria County?
+
Victoria County, Texas has a population of about 91,413, according to the U.S. Census Bureau American Community Survey.
How big is Victoria County?
+
Victoria County covers about 882.1 square miles of land, with a population density of roughly 104 people per square mile.
What is the FIPS code for Victoria County?
+
The FIPS county code for Victoria County, Texas is 48469. It is used to identify the county in federal datasets such as Census TIGER and FEMA flood maps.
What cities are in Victoria County?
+
Victoria is the city listed on GIS Map inside Victoria County.
What ZIP codes are in Victoria County?
+
Victoria County contains 3 ZIP codes mapped on GIS Map. The full list is linked from this page.
What is the median household income in Victoria County?
+
The median household income in Victoria County, Texas is about $70,896 per year.
What is the radon zone for Victoria County?
+
Victoria County is in EPA radon Zone 3, meaning the EPA predicts an average indoor radon level below 2 pCi/L. In this zone the EPA still recommends testing, because elevated radon can occur anywhere. The EPA is clear that a radon zone is a regional planning tool and not a prediction for any individual home.
What is the air quality in Victoria County?
+
Across 2024, the EPA monitor covering Victoria County recorded a median Air Quality Index of 35 (Good) and a 90th percentile of 49, with a peak of 105. 2 days reached unhealthy for sensitive groups or worse. Only counties that host an EPA monitor have these figures.
Is Victoria County in a drought?
+
As of the 13 October 2026 U.S. Drought Monitor map, severe drought covers 48.6% of Victoria County, and the county's Drought Severity and Coverage Index is 248.6 out of 500.
Does Victoria County have a wildfire history?
+
Between 1992 and 2024, 1,464 wildfires were reported to a federal, state or local agency in Victoria County, burning 17,848 acres in total — about 541 acres a year. The largest single fire covered 1,143 acres, and 2 fires reached 1,000 acres or more. The figures come from the U.S. Forest Service Fire Program Analysis Fire Occurrence Database, which records fires that were reported with a discovery date, a final size and a location at least as precise as a one-square-mile grid — so a small fire no agency recorded does not appear.
What is Victoria GIS?
+
Victoria GIS usually refers to the county's own parcel and zoning mapping system, which Victoria County publishes itself. This page is a separate, free viewer: it draws federal GIS layers — FEMA flood zones, USGS elevation, NLCD land cover and Census boundaries — over the Victoria County boundary, with no login required.
What GIS data is available for Victoria County?
+
The Victoria County map loads federal GIS layers directly in your browser: FEMA National Flood Hazard Layer flood zones, USGS 3DEP elevation contours and hillshade, NLCD land cover, Census TIGER school district boundaries, and TIGER ZIP code and county boundary lines.
How do I check flood zones in Victoria County?
+
Open the Victoria County map, turn on the FEMA flood zones layer, and zoom in. The National Flood Hazard Layer shows flood insurance rate map zones and floodways. Flood zones only draw once you are zoomed in far enough.
How do I find the coordinates or elevation of a spot in Victoria County?
+
Use the inspect tool on the Victoria County map and click any point. It reads back the coordinates, elevation and the layers under your cursor. You can also measure distance and area by drawing a line or polygon.
Local notes for Victoria County, TX
Questions and local knowledge from people who know the area. Every note is read before it appears here.