Grand County, Utah GIS Map
This GIS map of Grand County, Utah (UT) shows the official Census county boundary (FIPS 49019), with federal layers you can switch on for FEMA flood zones, USGS elevation contours and hillshade, NLCD land cover, and school district lines.
Grand County has a population of about 9,754 and a land area of 3,672.9 square miles, and the map covers the city listed inside it plus 1 ZIP code. Use the inspect tool to read coordinates, elevation and the layers under any point.
- State
- Utah (UT)
- Population
- 9,754
- Land area
- 3,672.9 sq mi
- Density
- 3 / sq mi
- Coordinates
- 38.9743, -109.5734
- FIPS code
- 49019
- City
- 1
- ZIP code
- 1
Grand County is not the only one — there is 1 other state with a county of the same name. Compare every Grand County.
Grand County Demographics
Source: U.S. Census Bureau, American Community Survey 2020-2024 5-year estimates.
Population
9,754
Households
4,554
Median household income
$67,106
Median age
40.8 years
Median home value
$538,700
Median gross rent
$1,118/mo
Owner-occupied homes
70.3%
Bachelor's degree or higher
37.5%
Below poverty level
13.3%
Land area
3,672.9 sq mi
Population density
3 / sq mi
Cities in Grand County
ZIP codes in Grand County
Grand County Population Growth
Source: U.S. Census Bureau, 2010 Census and Population Estimates Program (Vintage 2024: April 2020 estimates base and July 1, 2024 estimate).
2010 Census
9,225
April 2020 (estimates base)
9,672
July 2024 estimate
9,788
Change 2010-2020
+4.8%
Change 2020-2024
+1.2%
Natural Hazard Risk in Grand County
FEMA National Risk Index ratings for Grand County, compared with all U.S. counties.
Overall risk
Score 10.3 of 100
Expected annual loss
Buildings, population & agriculture
Social vulnerability
Susceptibility to hazard impacts
Community resilience
Ability to prepare & recover
Risk by Hazard
- LightningRelatively High
- LandslideRelatively Low
- AvalancheRelatively Moderate
- WildfireVery Low
- DroughtRelatively Low
- EarthquakeVery Low
- Heat WaveVery Low
- Winter WeatherRelatively Low
- Inland FloodingVery Low
- Ice StormVery Low
- TornadoVery Low
- Strong WindVery Low
- Cold WaveVery Low
- HailVery Low
Source: FEMA National Risk Index (December 2025 release). County-level ratings are relative to other U.S. counties and are not a property-specific assessment.
Environmental Conditions in Grand County, Utah
Radon potential, monitored air quality and current drought status for Grand County, Utah, from the Environmental Protection Agency and the U.S. Drought Monitor.
Radon potential
Zone 1
highest radon potential
EPA predicts an average indoor level at or above 4 pCi/L, so the EPA recommends a radon test for every home in this zone, and a mitigation system for new construction.
Air quality (2024)
Median AQI 48Good
2 days at unhealthy for sensitive groups or worse.
90th percentile 61, peak 105 across 365 monitored days.
Drought status
Extreme drought in 39.8% of the county
Drought Severity and Coverage Index 316.8 of 500.
- D1 Moderate drought23%
- D2 Severe drought37.2%
- D3 Extreme drought39.8%
Map of 13 October 2026.
Sources: EPA Map of Radon Zones (September 2025), EPA Air Quality Index (2024) and the U.S. Drought Monitor. A radon zone is a regional planning tool, not a prediction for any individual home — the EPA recommends testing every home regardless of zone. Air quality is shown only for counties that host an EPA monitor. Drought figures describe one weekly map, not a long-term climate average. Compare counties in Utah.
Wildfire History in Grand County, Utah
Every wildfire reported to a federal, state or local agency in Grand County, Utah between 1992 and 2024, from the U.S. Forest Service Fire Program Analysis Fire Occurrence Database.
Recorded fires
1,161
about 35.2 a year across 33 years
Acres burned
121,149
3,671 acres a year on average
Largest single fire
88,421
acres in one fire
Fires of 1,000+ acres
9
110,545 acres, 91% of all burned area
33 acres burned per square mile of county land since 1992 — the figure that makes Grand County comparable with counties of a very different size.
Substantial burn history415 of those fires (36% of the county's total) were discovered in 2015 or later — 10 of the 33 years covered, so the recent decade is over-represented in the record.
Source: USFS Fire Program Analysis Fire Occurrence Database (7th edition, 1992-2024). The database holds fires that were reported to a federal, state or local agency with a discovery date, a final size and a location at least as precise as a one-square-mile grid. It is not a census of every ignition: a small fire that no agency recorded does not appear, so a low count is not proof that a county does not burn. Burn history is not a forecast — for the official wildfire risk score, see the hazard section above. Compare wildfire history across counties.
GIS Data for Grand County, UT
The Grand County GIS map on this page loads live federal layers in your browser, so you can check flood zones, terrain, land cover and district boundaries anywhere in Grand County without a separate GIS login. All of the Grand GIS data below is drawn from public U.S. government sources.
Layers you can turn on
FEMA flood zones
National Flood Hazard Layer — flood insurance rate map zones and floodways.
Elevation contours and hillshade
USGS 3DEP terrain, so you can read slope and relief across the county.
Land cover
NLCD land cover classes — forest, developed, wetland and water.
School districts
Census TIGER unified and elementary school district boundaries.
ZIP code and county boundaries
Census TIGER ZCTA and county boundary lines.
Map tools
Measure distance and area
Draw a line or polygon to get length in miles or area in acres.
Sketch and annotate
Add points, lines and shapes on top of the map.
Inspect any point
Click the map to read coordinates, elevation and the layers under your cursor.
Download the map
Save the current view as a PNG image.
Where the data comes from
County boundaries come from the U.S. Census Bureau TIGER/Line program, flood zones from FEMA's National Flood Hazard Layer, terrain from the USGS 3D Elevation Program, land cover from the Multi-Resolution Land Characteristics Consortium, and demographics from the American Community Survey.
Property records and tax maps in Grand County
Most people who look up Grand County GIS data are after parcel-level records: who owns a property, what it last sold for, and what it is assessed at. Those records are kept locally, not federally, so they are not part of this map. Grand County property and tax map data lives with the county's own records office, and what that office is called varies by state — Texas counties run an appraisal district (usually searched as a “CAD”), Kentucky uses a Property Valuation Administrator (PVA), and most other states use a county assessor, auditor or tax office. Start with that office for a deed, a tax map number or a parcel boundary; use the map above for flood zones, elevation and land cover on the same land.
Grand County FAQ
What state is Grand County in?
+
Grand County is a county in Utah (UT).
What is the population of Grand County?
+
Grand County, Utah has a population of about 9,754, according to the U.S. Census Bureau American Community Survey.
How big is Grand County?
+
Grand County covers about 3,672.9 square miles of land, with a population density of roughly 3 people per square mile.
What is the FIPS code for Grand County?
+
The FIPS county code for Grand County, Utah is 49019. It is used to identify the county in federal datasets such as Census TIGER and FEMA flood maps.
What cities are in Grand County?
+
Moab is the city listed on GIS Map inside Grand County.
What ZIP codes are in Grand County?
+
Grand County contains 1 ZIP code mapped on GIS Map. The full list is linked from this page.
What is the median household income in Grand County?
+
The median household income in Grand County, Utah is about $67,106 per year.
What is the radon zone for Grand County?
+
Grand County is in EPA radon Zone 1, meaning the EPA predicts an average indoor radon level at or above 4 pCi/L. In this zone the EPA recommends a radon test for every home in this zone, and a mitigation system for new construction. The EPA is clear that a radon zone is a regional planning tool and not a prediction for any individual home.
What is the air quality in Grand County?
+
Across 2024, the EPA monitor covering Grand County recorded a median Air Quality Index of 48 (Good) and a 90th percentile of 61, with a peak of 105. 2 days reached unhealthy for sensitive groups or worse. Only counties that host an EPA monitor have these figures.
Is Grand County in a drought?
+
As of the 13 October 2026 U.S. Drought Monitor map, extreme drought covers 39.8% of Grand County, and the county's Drought Severity and Coverage Index is 316.8 out of 500.
Does Grand County have a wildfire history?
+
Between 1992 and 2024, 1,161 wildfires were reported to a federal, state or local agency in Grand County, burning 121,149 acres in total — about 3,671 acres a year. The largest single fire covered 88,421 acres, and 9 fires reached 1,000 acres or more. The figures come from the U.S. Forest Service Fire Program Analysis Fire Occurrence Database, which records fires that were reported with a discovery date, a final size and a location at least as precise as a one-square-mile grid — so a small fire no agency recorded does not appear.
What is Grand GIS?
+
Grand GIS usually refers to the county's own parcel and zoning mapping system, which Grand County publishes itself. This page is a separate, free viewer: it draws federal GIS layers — FEMA flood zones, USGS elevation, NLCD land cover and Census boundaries — over the Grand County boundary, with no login required.
What GIS data is available for Grand County?
+
The Grand County map loads federal GIS layers directly in your browser: FEMA National Flood Hazard Layer flood zones, USGS 3DEP elevation contours and hillshade, NLCD land cover, Census TIGER school district boundaries, and TIGER ZIP code and county boundary lines.
How do I check flood zones in Grand County?
+
Open the Grand County map, turn on the FEMA flood zones layer, and zoom in. The National Flood Hazard Layer shows flood insurance rate map zones and floodways. Flood zones only draw once you are zoomed in far enough.
How do I find the coordinates or elevation of a spot in Grand County?
+
Use the inspect tool on the Grand County map and click any point. It reads back the coordinates, elevation and the layers under your cursor. You can also measure distance and area by drawing a line or polygon.
Local notes for Grand County, UT
Questions and local knowledge from people who know the area. Every note is read before it appears here.