GIS Map

Los Angeles County, California GIS Map

This GIS map of Los Angeles County, California (CA) shows the official Census county boundary (FIPS 06037), with federal layers you can switch on for FEMA flood zones, USGS elevation contours and hillshade, NLCD land cover, and school district lines.

Los Angeles County has a population of about 9,808,667 and a land area of 4,060.3 square miles, and the map covers all 21 cities listed inside it plus 116 ZIP codes. Use the inspect tool to read coordinates, elevation and the layers under any point.

State
California (CA)
Population
9,808,667
Land area
4,060.3 sq mi
Density
2,416 / sq mi
Coordinates
34.1964, -118.2619
FIPS code
06037
Cities
21
ZIP codes
116

Los Angeles County Population Growth

Source: U.S. Census Bureau, 2010 Census and Population Estimates Program (Vintage 2024: April 2020 estimates base and July 1, 2024 estimate).

2010 Census

9,818,605

April 2020 (estimates base)

10,017,401

July 2024 estimate

9,757,179

Change 2010-2020

+2.0%

Change 2020-2024

-2.6%

Natural Hazard Risk in Los Angeles County

FEMA National Risk Index ratings for Los Angeles County, compared with all U.S. counties.

Overall risk

Very High

Score 100 of 100

Expected annual loss

$7,601,846,373

Buildings, population & agriculture

Social vulnerability

Relatively Moderate

Susceptibility to hazard impacts

Community resilience

Very Low

Ability to prepare & recover

Risk by Hazard

  • EarthquakeVery High
  • Inland FloodingVery High
  • WildfireVery High
  • Heat WaveRelatively High
  • LandslideRelatively High
  • TornadoRelatively High
  • LightningVery High
  • HailRelatively Moderate
  • AvalancheRelatively High
  • Coastal FloodingRelatively High
  • Strong WindRelatively Moderate
  • Winter WeatherRelatively Moderate
  • TsunamiRelatively Low
  • DroughtRelatively Low
  • Cold WaveVery Low

Source: FEMA National Risk Index (December 2025 release). County-level ratings are relative to other U.S. counties and are not a property-specific assessment.

Environmental Conditions in Los Angeles County, California

Radon potential, monitored air quality and current drought status for Los Angeles County, California, from the Environmental Protection Agency and the U.S. Drought Monitor.

Radon potential

Zone 2

moderate radon potential

EPA predicts an average indoor level between 2 and 4 pCi/L, so the EPA recommends testing, because elevated levels are still found in some homes here.

Air quality (2024)

Median AQI 80Moderate

133 days at unhealthy for sensitive groups or worse.

90th percentile 164, peak 230 across 366 monitored days.

Drought status

Abnormally dry in 6.7% of the county

Drought Severity and Coverage Index 6.7 of 500.

  • D0 Abnormally dry6.7%

Map of 13 October 2026.

Sources: EPA Map of Radon Zones (September 2025), EPA Air Quality Index (2024) and the U.S. Drought Monitor. A radon zone is a regional planning tool, not a prediction for any individual home — the EPA recommends testing every home regardless of zone. Air quality is shown only for counties that host an EPA monitor. Drought figures describe one weekly map, not a long-term climate average. Compare counties in California.

Wildfire History in Los Angeles County, California

Every wildfire reported to a federal, state or local agency in Los Angeles County, California between 1992 and 2024, from the U.S. Forest Service Fire Program Analysis Fire Occurrence Database.

Recorded fires

10,443

about 316.5 a year across 33 years

Acres burned

766,173

23,217 acres a year on average

Largest single fire

160,371

acres in one fire

Fires of 1,000+ acres

47

728,031 acres, 95% of all burned area

189 acres burned per square mile of county land since 1992 — the figure that makes Los Angeles County comparable with counties of a very different size.

Extensive burn history

2,856 of those fires (27% of the county's total) were discovered in 2015 or later — 10 of the 33 years covered, so the record is roughly even across the period.

Source: USFS Fire Program Analysis Fire Occurrence Database (7th edition, 1992-2024). The database holds fires that were reported to a federal, state or local agency with a discovery date, a final size and a location at least as precise as a one-square-mile grid. It is not a census of every ignition: a small fire that no agency recorded does not appear, so a low count is not proof that a county does not burn. Burn history is not a forecast — for the official wildfire risk score, see the hazard section above. Compare wildfire history across counties.

GIS Data for Los Angeles County, CA

The Los Angeles County GIS map on this page loads live federal layers in your browser, so you can check flood zones, terrain, land cover and district boundaries anywhere in Los Angeles County without a separate GIS login. All of the Los Angeles GIS data below is drawn from public U.S. government sources.

Layers you can turn on

  • FEMA flood zones

    National Flood Hazard Layer — flood insurance rate map zones and floodways.

  • Elevation contours and hillshade

    USGS 3DEP terrain, so you can read slope and relief across the county.

  • Land cover

    NLCD land cover classes — forest, developed, wetland and water.

  • School districts

    Census TIGER unified and elementary school district boundaries.

  • ZIP code and county boundaries

    Census TIGER ZCTA and county boundary lines.

Map tools

  • Measure distance and area

    Draw a line or polygon to get length in miles or area in acres.

  • Sketch and annotate

    Add points, lines and shapes on top of the map.

  • Inspect any point

    Click the map to read coordinates, elevation and the layers under your cursor.

  • Download the map

    Save the current view as a PNG image.

Where the data comes from

County boundaries come from the U.S. Census Bureau TIGER/Line program, flood zones from FEMA's National Flood Hazard Layer, terrain from the USGS 3D Elevation Program, land cover from the Multi-Resolution Land Characteristics Consortium, and demographics from the American Community Survey.

Property records and tax maps in Los Angeles County

Most people who look up Los Angeles County GIS data are after parcel-level records: who owns a property, what it last sold for, and what it is assessed at. Those records are kept locally, not federally, so they are not part of this map. Los Angeles County property and tax map data lives with the county's own records office, and what that office is called varies by state — Texas counties run an appraisal district (usually searched as a “CAD”), Kentucky uses a Property Valuation Administrator (PVA), and most other states use a county assessor, auditor or tax office. Start with that office for a deed, a tax map number or a parcel boundary; use the map above for flood zones, elevation and land cover on the same land.

Los Angeles County FAQ

What state is Los Angeles County in?

+

Los Angeles County is a county in California (CA).

What is the population of Los Angeles County?

+

Los Angeles County, California has a population of about 9,808,667, according to the U.S. Census Bureau American Community Survey.

How big is Los Angeles County?

+

Los Angeles County covers about 4,060.3 square miles of land, with a population density of roughly 2,416 people per square mile.

What is the FIPS code for Los Angeles County?

+

The FIPS county code for Los Angeles County, California is 06037. It is used to identify the county in federal datasets such as Census TIGER and FEMA flood maps.

What cities are in Los Angeles County?

+

Cities in Los Angeles County listed on GIS Map include Alhambra, Baldwin Park, Bellflower, Carson, Downey, El Monte, Glendale, Hawthorne, Inglewood, Lakewood, Lancaster, Long Beach and 9 more.

What ZIP codes are in Los Angeles County?

+

Los Angeles County contains 116 ZIP codes mapped on GIS Map. The full list is linked from this page.

What is the median household income in Los Angeles County?

+

The median household income in Los Angeles County, California is about $90,112 per year.

What is the radon zone for Los Angeles County?

+

Los Angeles County is in EPA radon Zone 2, meaning the EPA predicts an average indoor radon level between 2 and 4 pCi/L. In this zone the EPA recommends testing, because elevated levels are still found in some homes here. The EPA is clear that a radon zone is a regional planning tool and not a prediction for any individual home.

What is the air quality in Los Angeles County?

+

Across 2024, the EPA monitor covering Los Angeles County recorded a median Air Quality Index of 80 (Moderate) and a 90th percentile of 164, with a peak of 230. 133 days reached unhealthy for sensitive groups or worse. Only counties that host an EPA monitor have these figures.

Is Los Angeles County in a drought?

+

As of the 13 October 2026 U.S. Drought Monitor map, abnormally dry covers 6.7% of Los Angeles County, and the county's Drought Severity and Coverage Index is 6.7 out of 500.

Does Los Angeles County have a wildfire history?

+

Between 1992 and 2024, 10,443 wildfires were reported to a federal, state or local agency in Los Angeles County, burning 766,173 acres in total — about 23,217 acres a year. The largest single fire covered 160,371 acres, and 47 fires reached 1,000 acres or more. The figures come from the U.S. Forest Service Fire Program Analysis Fire Occurrence Database, which records fires that were reported with a discovery date, a final size and a location at least as precise as a one-square-mile grid — so a small fire no agency recorded does not appear.

What is Los Angeles GIS?

+

Los Angeles GIS usually refers to the county's own parcel and zoning mapping system, which Los Angeles County publishes itself. This page is a separate, free viewer: it draws federal GIS layers — FEMA flood zones, USGS elevation, NLCD land cover and Census boundaries — over the Los Angeles County boundary, with no login required.

What GIS data is available for Los Angeles County?

+

The Los Angeles County map loads federal GIS layers directly in your browser: FEMA National Flood Hazard Layer flood zones, USGS 3DEP elevation contours and hillshade, NLCD land cover, Census TIGER school district boundaries, and TIGER ZIP code and county boundary lines.

How do I check flood zones in Los Angeles County?

+

Open the Los Angeles County map, turn on the FEMA flood zones layer, and zoom in. The National Flood Hazard Layer shows flood insurance rate map zones and floodways. Flood zones only draw once you are zoomed in far enough.

How do I find the coordinates or elevation of a spot in Los Angeles County?

+

Use the inspect tool on the Los Angeles County map and click any point. It reads back the coordinates, elevation and the layers under your cursor. You can also measure distance and area by drawing a line or polygon.

Local notes for Los Angeles County, CA

Questions and local knowledge from people who know the area. Every note is read before it appears here.