Bannock County, Idaho GIS Map
This GIS map of Bannock County, Idaho (ID) shows the official Census county boundary (FIPS 16005), with federal layers you can switch on for FEMA flood zones, USGS elevation contours and hillshade, NLCD land cover, and school district lines.
Bannock County has a population of about 89,454 and a land area of 1,112.5 square miles, and the map covers all 2 cities listed inside it plus 4 ZIP codes. Use the inspect tool to read coordinates, elevation and the layers under any point.
- State
- Idaho (ID)
- Population
- 89,454
- Land area
- 1,112.5 sq mi
- Density
- 80 / sq mi
- Coordinates
- 42.6929, -112.2290
- FIPS code
- 16005
- Cities
- 2
- ZIP codes
- 4
Bannock County Demographics
Source: U.S. Census Bureau, American Community Survey 2020-2024 5-year estimates.
Population
89,454
Households
33,590
Median household income
$66,499
Median age
35.2 years
Median home value
$300,700
Median gross rent
$960/mo
Owner-occupied homes
69.5%
Bachelor's degree or higher
30.6%
Below poverty level
12.3%
Land area
1,112.5 sq mi
Population density
80 / sq mi
Bannock County Population Growth
Source: U.S. Census Bureau, 2010 Census and Population Estimates Program (Vintage 2024: April 2020 estimates base and July 1, 2024 estimate).
2010 Census
82,839
April 2020 (estimates base)
87,023
July 2024 estimate
91,010
Change 2010-2020
+5.1%
Change 2020-2024
+4.6%
Natural Hazard Risk in Bannock County
FEMA National Risk Index ratings for Bannock County, compared with all U.S. counties.
Overall risk
Score 66.9 of 100
Expected annual loss
Buildings, population & agriculture
Social vulnerability
Susceptibility to hazard impacts
Community resilience
Ability to prepare & recover
Risk by Hazard
- WildfireRelatively Moderate
- Winter WeatherRelatively High
- Cold WaveRelatively Moderate
- EarthquakeRelatively Low
- LightningRelatively Moderate
- Heat WaveRelatively Moderate
- Volcanic ActivityVery Low
- LandslideVery Low
- Inland FloodingRelatively Low
- HailRelatively Low
- AvalancheVery Low
- Ice StormVery Low
- DroughtVery Low
- TornadoVery Low
- Strong WindVery Low
Source: FEMA National Risk Index (December 2025 release). County-level ratings are relative to other U.S. counties and are not a property-specific assessment.
Environmental Conditions in Bannock County, Idaho
Radon potential, monitored air quality and current drought status for Bannock County, Idaho, from the Environmental Protection Agency and the U.S. Drought Monitor.
Radon potential
Zone 2
moderate radon potential
EPA predicts an average indoor level between 2 and 4 pCi/L, so the EPA recommends testing, because elevated levels are still found in some homes here.
Air quality (2024)
Median AQI 39Good
2 days at unhealthy for sensitive groups or worse.
90th percentile 59, peak 104 across 366 monitored days.
Drought status
Extreme drought in 56.1% of the county
Drought Severity and Coverage Index 356.1 of 500.
- D2 Severe drought43.9%
- D3 Extreme drought56.1%
Map of 13 October 2026.
Sources: EPA Map of Radon Zones (September 2025), EPA Air Quality Index (2024) and the U.S. Drought Monitor. A radon zone is a regional planning tool, not a prediction for any individual home — the EPA recommends testing every home regardless of zone. Air quality is shown only for counties that host an EPA monitor. Drought figures describe one weekly map, not a long-term climate average. Compare counties in Idaho.
Wildfire History in Bannock County, Idaho
Every wildfire reported to a federal, state or local agency in Bannock County, Idaho between 1992 and 2024, from the U.S. Forest Service Fire Program Analysis Fire Occurrence Database.
Recorded fires
529
about 16.0 a year across 33 years
Acres burned
56,312
1,706 acres a year on average
Largest single fire
8,718
acres in one fire
Fires of 1,000+ acres
15
44,496 acres, 79% of all burned area
51 acres burned per square mile of county land since 1992 — the figure that makes Bannock County comparable with counties of a very different size.
Substantial burn history170 of those fires (32% of the county's total) were discovered in 2015 or later — 10 of the 33 years covered, so the recent decade is over-represented in the record.
Source: USFS Fire Program Analysis Fire Occurrence Database (7th edition, 1992-2024). The database holds fires that were reported to a federal, state or local agency with a discovery date, a final size and a location at least as precise as a one-square-mile grid. It is not a census of every ignition: a small fire that no agency recorded does not appear, so a low count is not proof that a county does not burn. Burn history is not a forecast — for the official wildfire risk score, see the hazard section above. Compare wildfire history across counties.
GIS Data for Bannock County, ID
The Bannock County GIS map on this page loads live federal layers in your browser, so you can check flood zones, terrain, land cover and district boundaries anywhere in Bannock County without a separate GIS login. All of the Bannock GIS data below is drawn from public U.S. government sources.
Layers you can turn on
FEMA flood zones
National Flood Hazard Layer — flood insurance rate map zones and floodways.
Elevation contours and hillshade
USGS 3DEP terrain, so you can read slope and relief across the county.
Land cover
NLCD land cover classes — forest, developed, wetland and water.
School districts
Census TIGER unified and elementary school district boundaries.
ZIP code and county boundaries
Census TIGER ZCTA and county boundary lines.
Map tools
Measure distance and area
Draw a line or polygon to get length in miles or area in acres.
Sketch and annotate
Add points, lines and shapes on top of the map.
Inspect any point
Click the map to read coordinates, elevation and the layers under your cursor.
Download the map
Save the current view as a PNG image.
Where the data comes from
County boundaries come from the U.S. Census Bureau TIGER/Line program, flood zones from FEMA's National Flood Hazard Layer, terrain from the USGS 3D Elevation Program, land cover from the Multi-Resolution Land Characteristics Consortium, and demographics from the American Community Survey.
Property records and tax maps in Bannock County
Most people who look up Bannock County GIS data are after parcel-level records: who owns a property, what it last sold for, and what it is assessed at. Those records are kept locally, not federally, so they are not part of this map. Bannock County property and tax map data lives with the county's own records office, and what that office is called varies by state — Texas counties run an appraisal district (usually searched as a “CAD”), Kentucky uses a Property Valuation Administrator (PVA), and most other states use a county assessor, auditor or tax office. Start with that office for a deed, a tax map number or a parcel boundary; use the map above for flood zones, elevation and land cover on the same land.
Bannock County FAQ
What state is Bannock County in?
+
Bannock County is a county in Idaho (ID).
What is the population of Bannock County?
+
Bannock County, Idaho has a population of about 89,454, according to the U.S. Census Bureau American Community Survey.
How big is Bannock County?
+
Bannock County covers about 1,112.5 square miles of land, with a population density of roughly 80 people per square mile.
What is the FIPS code for Bannock County?
+
The FIPS county code for Bannock County, Idaho is 16005. It is used to identify the county in federal datasets such as Census TIGER and FEMA flood maps.
What cities are in Bannock County?
+
Cities in Bannock County listed on GIS Map include Chubbuck, Pocatello.
What ZIP codes are in Bannock County?
+
Bannock County contains 4 ZIP codes mapped on GIS Map. The full list is linked from this page.
What is the median household income in Bannock County?
+
The median household income in Bannock County, Idaho is about $66,499 per year.
What is the radon zone for Bannock County?
+
Bannock County is in EPA radon Zone 2, meaning the EPA predicts an average indoor radon level between 2 and 4 pCi/L. In this zone the EPA recommends testing, because elevated levels are still found in some homes here. The EPA is clear that a radon zone is a regional planning tool and not a prediction for any individual home.
What is the air quality in Bannock County?
+
Across 2024, the EPA monitor covering Bannock County recorded a median Air Quality Index of 39 (Good) and a 90th percentile of 59, with a peak of 104. 2 days reached unhealthy for sensitive groups or worse. Only counties that host an EPA monitor have these figures.
Is Bannock County in a drought?
+
As of the 13 October 2026 U.S. Drought Monitor map, extreme drought covers 56.1% of Bannock County, and the county's Drought Severity and Coverage Index is 356.1 out of 500.
Does Bannock County have a wildfire history?
+
Between 1992 and 2024, 529 wildfires were reported to a federal, state or local agency in Bannock County, burning 56,312 acres in total — about 1,706 acres a year. The largest single fire covered 8,718 acres, and 15 fires reached 1,000 acres or more. The figures come from the U.S. Forest Service Fire Program Analysis Fire Occurrence Database, which records fires that were reported with a discovery date, a final size and a location at least as precise as a one-square-mile grid — so a small fire no agency recorded does not appear.
What is Bannock GIS?
+
Bannock GIS usually refers to the county's own parcel and zoning mapping system, which Bannock County publishes itself. This page is a separate, free viewer: it draws federal GIS layers — FEMA flood zones, USGS elevation, NLCD land cover and Census boundaries — over the Bannock County boundary, with no login required.
What GIS data is available for Bannock County?
+
The Bannock County map loads federal GIS layers directly in your browser: FEMA National Flood Hazard Layer flood zones, USGS 3DEP elevation contours and hillshade, NLCD land cover, Census TIGER school district boundaries, and TIGER ZIP code and county boundary lines.
How do I check flood zones in Bannock County?
+
Open the Bannock County map, turn on the FEMA flood zones layer, and zoom in. The National Flood Hazard Layer shows flood insurance rate map zones and floodways. Flood zones only draw once you are zoomed in far enough.
How do I find the coordinates or elevation of a spot in Bannock County?
+
Use the inspect tool on the Bannock County map and click any point. It reads back the coordinates, elevation and the layers under your cursor. You can also measure distance and area by drawing a line or polygon.
Local notes for Bannock County, ID
Questions and local knowledge from people who know the area. Every note is read before it appears here.